750 without motor Is M60B40 plug and play if i have everything for the motor...

750 without motor. Is M60B40 plug and play if i have everything for the motor or is wiring going to be a hassle like different wiring loom connection plug etc ?

Anyone done this?

%d comments
  • I believe wiring will be diffirent because its v8 not v12

  • Cars
  • I am not talking about engine loom itself. The body loom im thinking about

  • I think its everything different for the v8 and v12, and I mean everything

  • Only thing i think you have to worry about is EML and a throttle cable ;)

  • I swapped a M30B35 into a 750i chassis ;)

  • Haha gerðir þú það í Sy242?

    Það var aldrei klárað að græja skiptingarloomið rett svo hann fór bara í gang en keyrði ekki

  • Hann àtti alltaf að verða beinskiptur ;)

  • Enough to install throttle cable and voila?

  • Æði. En ég reif hann bara

  • E32 er natturulega með 4hp... Veit ekki en se fyrir mer að skiptingarloomið se litið vesen... En afhverju rifa... Billinn var mjög heill

  • Það var búið að rífa úr honum eitthvað áður en ég komst í hann. Reif hann 2011.

  • the v8 loom should near enough just plug into the 750's main connector. you'll need the matching gearbox and gearbox ecu too though.

  • Naturally. That basicly tells me everything i needed to know. Thanks

  • and you may need to relocate the hydro brake booster possibly.

  • I have a spare 730v8 booster setup

  • you should be fine then. dont forget to change the trans selector switch in the centre console too.

  • Cars
  • Id love to see a Steptronic retrofit... There is a write up on E38.org